D6 - Virgin Fuel Oil

Product Specification – D6 Virgin Fuel Oil
METHOD UNITS |
TEST |
RESULTS |
UNIT |
ASTM D5002 |
Density and Relative Density of Crude Density and Relative Density of Crude |
29.7(29.7) Min |
API |
ASTM D1298-99 |
Density @ 15 Deg C |
0.87(0.775) |
Kg/t |
ASTM D97 |
Pour Point of Petroleum |
<-33(-36) BELOW ZERO |
®C |
ASTM D93-IP34 |
Pensky-Martens Closed cup Flash Point |
117(137) Min |
®F |
ASTM D4294 |
Sulfur content in petroleum |
0.38(0.358) Max |
W1% |
ASTM D445 |
Kinematic/Dynamic viscosity |
17.83(18.12) Max |
Mm2% |
ASTM D6304 |
Water content by coulometric |
0.20(0.7) Max |
W1% |
ASTM D482 |
Ash from petroleum product |
0.279(1.007) Max |
W1% |
ASTM D2161 |
Conversion of kinematic viscosity To |
10.9SFS |
Max |
ASTM D5184 |
Aluminum and Silicon in Fuel Oils By |
102(max) |
Mg/kg |
ASTM D95 |
Water by Distillation Vol% |
0.70(Max) |
Vol% |
ASTM D4530.06 |
Carbon Residue |
1.11(max) |
W1% |
Method Test Result Unit |
|||
IP 143 Asphalteness Heptane Insoluble |
|||
|
Asphaltene content |
0.08 |
W1% |
IP 501 Determination of AL, Si, V, Ni, Fe, Na, Ca, Zn, P in Fuel Oil |
|||
|
Aluminum |
372 |
Mg/kg |
Note:- The product specifications are subject to change depending on the origin.